Cinch Latch Seal Assembly
LTH-144-099-114XX-07-02-A2-045
Features
The Latch Seal Assembly is run on a frac string, or production string, and engages the top seal bore of the liner hanger packer, isolates the annulus from pressures, and provides a positive connection and seal integrity to the liner top. The Seal Assembly is matched with the thread type and grade of the casing string. It is released from the liner top with eight right hand turns in the neutral position and is latched into the liner top receptacle with straight compression. Various seal options are available for HTHP completions as well.
Full Casing ID allows for multistage frac ball drop system compatibility.
- Compression ratchet in
- Right hand rotation to release
Technical Specifications
| Imperial | Metric | |||
| Size: | 7″ x 4-1/2″ | in | 177.8 x 114.3 | mm |
| Thread: | MATCH TIEBACK | |||
| Length: | 188.68 | in | 4.79 | m |
| OD: | 5.688 | in | 144.48 | mm |
| ID: | 3.960 | in | 100.58 | mm |
| Metallurgy: | P-110 (125ksi) | |||
| Burst: | 10,690 | psi | 73,705 | kPa |
| Collapse: | 10,000 | psi | 68,948 | kPa |
| Pull Strength (Body): | 225,000 | lbs | 100,800 | daN |
| Mandrel Length: | 15 | ft | 4.57 | m |
| Seal OD: | 5.000 | in | 127.00 | mm |
Confidential
This document and its contents are considered confidential and proprietary to Saddle Completions Inc. The document and information contained in the document may not be used, disclosed or reproduced without prior written authorization of Saddle Completions Inc. and those so authorized may only use the document and information consistent with the written authorization. The continued possession of this document by an authorized person is considered continued consent to these terms.