Cinch Liner Hanger
LHA-149-100-114CS-06-02-A3
Features
The Saddle Completions Cinch Liner Hanger is a premium, high slip contact area, hydraulically set anchoring system for the most critical wells. It carries high hang weights and can be run in conjunctions with the Cinch Liner Top Packer for a liner top seal if required. The Cinch Liner Hanger can be used in both cemented and open hole applications.
- Bi-directional Anti-preset feature
- Solid upper seal bore is solidly attached to packer mandrel – no floating O-ring design
Hydraulic Release Running Tool w/ Rotational Capability - Upper seal bore allows for latch in sealing for frac, accommodating all ball sizes
dropped down tubing - Secondary Left Hand Mechanical Release
Technical Specifications
| Imperial | Metric | |||
| Size: | 7″ x 4-1/2″ | in | 177.8 x 114.3 | mm |
| Thread: | MATCH TIEBACK | |||
| Length: | 188.68 | in | 4.79 | m |
| OD: | 5.688 | in | 144.48 | mm |
| ID: | 3.960 | in | 100.58 | mm |
| Metallurgy: | P-110 (125ksi) | |||
| Burst: | 10,690 | psi | 73,705 | kPa |
| Collapse: | 10,000 | psi | 68,948 | kPa |
| Pull Strength (Body): | 225,000 | lbs | 100,800 | daN |
| Mandrel Length: | 15 | ft | 4.57 | m |
| Seal OD: | 5.000 | in | 127.00 | mm |
Confidential
This document and its contents are considered confidential and proprietary to Saddle Completions Inc. The document and information contained in the document may not be used, disclosed or reproduced without prior written authorization of Saddle Completions Inc. and those so authorized may only use the document and information consistent with the written authorization. The continued possession of this document by an authorized person is considered continued consent to these terms.