Cinch Rotational Liner Top Packer
LTP-149-100-114CS-07-01-A3-045 (26-32#)
Features
The Saddle Completions Cinch Liner Top Packer is a high-performance Liner Top Isolation using a floating PBR with an ECNER high-pressure packing element. The Cinch Rotational Liner Top Packer is a liner top option for either vertical, low deviation, mid-length, or extended reach lateral wellbores. The Cinch Rotational Liner Top Packer is used in conjunction with the Cinch liner Hanger and can be used in cemented or open hole liner systems.
- Anti-preset feature
- Hydraulic Release Running Tool w/Rotational Capability
- Secondary Left Hand Mechanical Release
- Liner Top Packer is stomp set after cement job
- Solid upper seal bore is solidly attached to packer mandrel – no floating O-ring design
- Upper seal bore allows for latch in sealing for frac, accommodating all ball sizesdropped down tubing
Technical Specifications
| Imperial | Metric | |||
| Size: | 7″ x 4-1/2″ | in | 177.8 x 114.3 | mm |
| Thread: | CDC Starseal | |||
| Length: | 272.50 | in | 6.92 | m |
| OD: | 5.875 | in | 149.23 | mm |
| ID: | 3.960 | in | 100.58 | mm |
| Metallurgy: | P-110 | |||
| Burst: | 13,080 | psi | 90,183 | kPa |
| Collapse: | 12,424 | psi | 85,660 | kPa |
| Pull Strength (Body): | 329,984 | lbs | 147,833 | daN |
| PBR Length: | 15 | ft | 4.57 | m |
| PBR ID: | 5.000 | in | 127.00 | mm |
Confidential
This document and its contents are considered confidential and proprietary to Saddle Completions Inc. The document and information contained in the document may not be used, disclosed or reproduced without prior written authorization of Saddle Completions Inc. and those so authorized may only use the document and information consistent with the written authorization. The continued possession of this document by an authorized person is considered continued consent to these terms.