Torque Lock Hydraulic Running Tool
TLR-123-050-050SL-05-02-A2 | SST-122-050-050SL-05-02-A2
Features
The Cinch Torque Lock Hydraulic Release Running Tool/Setting Tool is used to run and set the Cinch Liner Hanger/Liner Top Packer system for cemented or open hole applications. This tool incorporates many features to ensure reliability of the setting sequence. With rotational capabilities, torque is limited only be the liner and pipe threads. This tool also has a secondary left-hand mechanical release for redundancy.
- High Torque Extension Mandrel
- Collet Stomp Tool
- Torque Lock Running Tool
- Cement Bushing Assembly
- Solid Debris Sleeve to protect PBR
- Mechanical release secondary with left hand rotation and retains ability to compression stomp set liner top element after release
Technical Specifications
| Imperial | Metric | |||
| Size: | 7″ x 4-1/2″ | in | 177.8 x 114.3 | mm |
| Thread: | XT-39 Box | |||
| Length: | 424.52 | in | 10.78 | m |
| OD: | 5.688 | in | 144.48 | mm |
| ID: | 2.000 | in | 50.80 | mm |
| Metallurgy: | P-110 | |||
| Burst: | 13,125 | psi | 90,494 | kPa |
| Collapse: | 12,465 | psi | 85,943 | kPa |
| Pull Strength (Body): | 339,170 | lbs | 151,948 | daN |
Confidential
This document and its contents are considered confidential and proprietary to Saddle Completions Inc. The document and information contained in the document may not be used, disclosed or reproduced without prior written authorization of Saddle Completions Inc. and those so authorized may only use the document and information consistent with the written authorization. The continued possession of this document by an authorized person is considered continued consent to these terms.